Tip Cleaning Notes:

1.If the sponge cleaner is utilized, air-blow cleaning is normally not required.

2.Some applications require air-blow & sponge tip cleaning (depending upon tip type)

3.Standard cleaning duration is 0.5 second

4.The iron tip does not need to be extended if not required

5.The air-blow cup is not included with the standard Luna system

 

If the tip is not “wetting”with solder (oxidation):

1.Remove pre-solder on tip completely.

2.Remove oxidation by sand paper after cooling down the iron tip to room temperature.

3.Turn on the power and apply solder on the iron tip during rising the temperature (manually).